CP Honda H22 Pistons for Sleeved Block

Forged CP H22 pistons for use in sleeved engine blocks are compatible with oversized valves and high lift camshafts. CP Carrillo products represent the highest quality and are engineered for maximum power. Pistons can be ordered with gas ports, skirt coating, ceramic top coating, and stronger wrist pins if desired. To order a set with any of these options, please include a message in the note section of the order form during our check out process, or you may contact us in advance for more info on these options.

The H22 block must be sleeved in order for the cylinder bores to last using these pistons and rings. The make up of the factory aluminum block is not conducive to long life and high performance with the as produced cylinder walls. This is why the block must be sleeved in order to use these pistons and rings.

Forged CP Pistons H22 Piston Sets for use in Sleeved H22 Engine Blocks Bore Size Cylinder bore size piston is designed to work in, listed in inches and millimeters Relative Size Denotes whether this bore size is stock standard size, or an oversize listed in millimeters CR Compression Ratio Crankshaft Stroke Designed to work with stock crank stroke of 90.7 mm Connecting Rod Length Designed to work with stock rod length of 143.15 mm Wrist Pin Diameter 22mm C.H. Compression Height This is the distance from the centerline of the wrist pin bore to the top flat surface of the piston. Ring Widths Ring grooves are machined to work with 1.0mm, 1.2mm, 2.8mm rings WHAT’S INCLUDED 4 forged pistons, 4 Wrist Pins, pin retention locks and premium piston ring set
Bore Inches	Bore MM	Size MM	Stroke MM	Rod Length MM	C.H.	CR	Piston Set
3.425	87	STD	90.7	143.15	1.22	9	SC7030 $1232.08 $862.46
3.445	87.5	+0.5mm	90.7	143.15	1.22	9	SC7031 $1232.08 $862.46
3.465	88	+1.0mm	90.7	143.15	1.22	9	SC7034 $1232.08 $862.46
3.504	89	+2.0mm	90.7	143.15	1.22	9	SC7035 $1232.08 $862.46
3.543	90	+3.0mm	90.7	143.15	1.22	9	SC7036 $1232.08 $862.46
3.425	87	STD	90.7	143.15	1.22	10	SC7130 $1232.08 $862.46
3.425	87	STD	90.7	143.15	1.22	11.5	SC7131 $1232.08 $862.46
3.445	87.5	+0.5mm	90.7	143.15	1.22	11.5	SC7132 $1232.08 $862.46
3.465	88	+1.0mm	90.7	143.15	1.22	11.5	SC7133 $1232.08 $862.46
More general and technical information about CP Carrillo Performance and our complete listing of CP products is here > CP Carrillo Forged Pistons Catalog

Custom Honda H22 Pistons

If you do not see a shelf stocking part number set here with the specifications that you need, we can provide you with a set of custom pistons built to your exact requirements. Please contact us if you would like to discuss a set of CP customs and we will be happy to work with you to insure you get exactly the H22 pistons that you need.